GE S2020 - Page 117

GE Reason Switches
Chapter 5 – Interfaces
REASON SWITCHES-TM-EN-3
117
Allowed commands at the main menu are:
 clear reset functions;
 configure enter configuration mode;
 copy copy from source to destination;
 delete delete one file in flash: file system;
 dir directory of all files in flash: file system;
 disable turn off privileged commands;
 do to run exec commands in configuration mode;
 dot1x IEEE standard for port-based access control;
 enable turn on privileged commands;
 erps Ethernet Ring Protection switching;
 exit exit from EXEC mode;
 failsafe configure failsafe relay;
 firmware firmware upgrade or swap;
 help description of the interactive help system;
 ipv4 IPv4 commands;
 ipv6 Ipv6 commands;
 link-oam link OAM configuration;
 logout exit from EXEC mode;
 more display file;
 no negate a command or set its defaults;
 ping send ICMP echo messages;
 platform platform configuration;
 ptp misc non persistent 1588 settings;