GE S2020 - Page 252

GE Reason Switches
Chapter 8 – Monitoring
252
REASON SWITCHES-TM-EN-3
 Port number;
 Status of the port, that is, if port is Router port or
not.
o Groups Information: provides information about MLD table groups
allowed in the switch.
 VLAN ID (VID) number of the group;
 Group address range of the group;
 Port members, where is displayed which ports are
member of the group.
o MLD SFM information, that is, MLD Source-Filtered Multicast
information. This information is related only to IGMPv3 and MLDv2
protocols, which has support to channel subscription.
 VLAN ID (VID) number of the group;
 Group address range of the group;
 Port members, where is displayed which ports are
members of the group;
 Mode of SSM filtering, which indicates filtering mode (VID
number, port number, address range of the group);
 Source address, that is, IP address of the multicast source;
 Type of the filtering of SSM (source-specific mode);
 Hardware Filter / Switch, which indicates if data plane
sent by source of the group can be treated by chip or not.