D
IRECTION 5813707-100, REVISION 2 VENUE™ SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-59
PRELIMINARY
6.) Remove cart’s cables plastic cover.
7.) Locate the ECG USB cable, and gently pull the cable upwards through the pole routing.
8-2-24-5
ECG USB Cable Installation Procedure
1) Route the ECG USB cable through the pole .
2.) Reconnect the USB to the ECG.
3.) Close the pole cables plastic cover.
4.) Re-mount the system.
Figure 8-141 Remove Cable Plastic Cover
Figure 8-142 Pull ECG USB cable upwards through the pole
• Mounting System on Cart
To Next Page
Loading...
