D
IRECTION 5813707-100, REVISION 2 VENUE™ SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-77
PRELIMINARY
9.) Disconnect the SW installation media and tap OK in the message box.
10.)In the Confirmation dialog box that appears:
11.)Tap Yes to continue the reboot.
12.)Continue with Venue GO EZ Config Setup Wizard:
Figure 8-172 Venue Go™ Update Process- Confirmation Dialog Box
• Run Venue Go™ EZ Config Setup Wizard
Perform the checks listed in Operating System and Application Software Installation Procedure on
page 8-74
To Next Page
Loading...
