After The Exam Is Over
3-16 Versana Essential – User Guide
5759238-100 English
Rev. 2
EZBackup and EZMove (continued)
Basically, when you perform the EZBackup or EZMove
procedure, you insert the media (or connect USB HDD if
applicable), the system backs up/moves the images, and
creates a reference between the patient database and the
media’s volume.
EZBackup/EZMove can take up to 20 minutes (or longer,
depending on the size of the backup). Make sure to schedule
this at the same time daily, when no patients are scheduled.
1. Prepare unformatted media or the USB HDD before starting
EZBackup/EZMove.
2. Specify the EZBackup/EZMove setup on the Utility -->
System --> Backup/Restore page.
3. To start the EZBackup/EZMove procedure, go to the Patient
menu and select EZBackup/EZMove. The EZBackup/
EZMove Wizard starts.
NOTE: If you use the USB HDD, some wizards and the pop-up
messages DO NOT appear.
To Next Page
Loading...
