Optimizing the Image
Versana Essential – User Guide 2-15
5759238-100 English Rev. 2
Freezing an image
To freeze an image,
• Press Freeze. The Freeze key backlight turns green. Image
is on freeze mode (Frozen image).
If you are in a mixed mode, both images freeze immediately.
Deactivating Freeze restarts both modes.
To reactivate the image,
• Press Freeze again. The Freeze key backlight becomes
blue (unfreeze). Image is on real time scan mode (Live
image).
NOTE: Deactivating Freeze erases all measurements and calculations
from the display (but not from the report).
Use the Trackball to start CINE after pressing Freeze.
Activating CINE
To activate CINE,
1. Press Freeze.
2. Move the Trackball.
To Next Page
Loading...
