Performing an Exam
2-16 Versana Essential – User Guide
5759238-100 English
Rev. 2
Body Patterns
Press the Body Pattern key on the control panel to enter into
body pattern mode.
Select the desired body pattern and the selected body pattern is
displayed on the monitor.
• Select the Move Pattern control to reposition the body
pattern with the Trackball and Set controls.
• Move the body pattern to the desired location.
NOTE: Home Position is independent between the display format.
NOTE: Body Pattern Position is updated when the display format is
changed.
NOTE: Body Pattern Position is reset to factory default when patient is
changed (e.g. End Exam).
• A probe mark is associated with the body patterns and
illustrates the probe position on the body pattern. This
marker can be placed with the Trackball and rotated with
the Body Pattern button.
• The probe mark type is selectable by rotating the Probe
Type control. There are different choices available with one
being a blank selection.
• To select the active side in dual B-Mode, use the Active
Side rotary control on the Primary Menu.
• To clear the body pattern, press the Body Pattern control to
activate body patterns and then press the Clear key.
• Press Set on the keyboard to exit without erasing the body
pattern.
To Next Page
Loading...
