GE Voluson 730 - Layout of the 2 D-Mode Main Menu

Description of the System
3.5.1 Layout of the 2D-Mode Main Menu
All B-Mode operations are started from this menu. It contains 4 main groups of operating functions:
Main group 1:
Main menu keys for:
Presets
Sub window probe dependent functions
Image up/down
Image left/right
Trapezoid mode
FFC (Focus and Frequency Composite)
CRI (Compound Resolution Imaging)
Image Angle
β-View (Beta View)
Focal Zones
OTI (Optimized Tissue Imaging)
Frequency
Main group 2:
Sub menu keys for:
adjusting the 2D image
Main group 3:
Menu Others keys
System Setup
Biopsy
Histogram
etc.
Main group 4:
Change from write-only functions to read-only functions when changing read/write
(Freeze/Run):
Remarks:
Selecting a new mode displays a new “Main” menu with the operating functions of this mode.
The keys for the functions Focus, OTI, β-View, Frequency, Angle, Trapezoid mode, FFC and CRI
only appear on the touchpanel if they are available for the selected probe.
Example:
Voluson
®
730 - Instruction Manual
105838 Rev. 3 3-9