GE Voluson 730 - To Connect Internal and External Accessories

Connections
Additionally the IEC60601-1-1 requires control measurement of leakage currents.
The system integrator (any person connecting the medical device to other devices) is responsible that
the connections are safe.
IEC XXX Stands for standards such as : IEC 60601 for medical devices
IEC 950 for information technology equipment etc.
6.2 To Connect internal and external Accessories
review:
Main Module
(chapter 6.2.1)
Power Supply (rear Side)
(chapter 6.2.2)
Power Supply (for Auxiliary Equipments)
(chapter 6.2.3)
Side of the Main Module-Connectors
(chapter 6.2.4)
Connector Panel (rear Side)
(chapter 6.2.5)
Color Video Monitor Connection
(chapter 6.2.6)
B/W Video Printer Connection Scheme
(chapter 6.2.7)
S-VHS Videorecorder Connection Scheme
(chapter 6.2.8)
Color Video Printer Connection Scheme (chapter 6.2.9)
Line Printer Connection Scheme
(chapter 6.2.10)
ECG-preamplifier (MAN 6) Connection
(chapter 6.2.11)
Foot Switch (MFT 7) Connection
(chapter 6.2.12)
Important Notes: Connecting Auxiliary Equipment
(chapter 6.3)
Voluson
®
730 - Instruction Manual
105838 Rev. 3 6-3