GE Voluson 730 - Interfaces

Technical Data / Information
7.16 Interfaces
Video out BNC-socket
video norm: PAL/NTSC
FBAS-signal: 1V
ss
/75Ω
Video out BNC-socket
video norm: PAL/NTSC or black/white video (whiteout color carrier)
CCIR-signal: 1V
ss
/75Ω
Video in: BNC-socket
video norm: PAL/NTSC
FBAS-signal: 1V
ss
/75Ω
S-Video in/out: 1 x Mini DIN for IN
1 x Mini DIN for OUT
video norm: PAL/NTSC
Chrominance: in: 0.3V
ss
/75Ω
Luminance: in: 1.0V
ss
/75Ω
Mass: in: GND
Chrominance: out: 0.3V
ss
/75Ω
Luminance: out: 1.0V
ss
/75Ω
Mass: out: GND
RGB out: BNC -sockets
Red: 0.7V
ss
/75Ω
Green: 0.7V
ss
/75Ω
Blue: 0.7V
ss
/75Ω
Composite H/V-Sync: TTL-CMOS
Mass: GND
VGA out: Red: 0.7V
ss
/75Ω
Green: 0.7V
ss
/75Ω
Blue: 0.7V
ss
/75Ω
Separate positive H/V-Sync: TTL-label
Audio in L: Cinch, LF-signal 1.2V
ss
Audio in R: Cinch, LF-signal 1.2V
ss
Audio out L: Cinch, LF-signal 1.2V
ss
Audio out R: Cinch, LF-signal 1.2V
ss
Footswitch in: BNC-socket: FREEZE/RUN
Freeze/Run in: TTL-CMOS, active low
Remote control out: BNC-socket: PRINT A
DIN-socket: PRINT B
Remote signal: TTL-CMOS, active low, Imax = 25 mA
RS232: VTR remote control
Net connection: Ethernet, IEC802-2, IEC802-3
Software: DICOM 3.0 standard
Voluson
®
730 - Instruction Manual
7-12 105838 Rev. 3