Technical Data / Information
7.11 Volume Scan Module
Vol. scan size: 64 MB minimum
The required memory space depends on scan parameters (VOL-box
size and quality (low , mid1 , mid2 , high1 , high2).
typ.: 1-5 MB
Lines/2D-image: max. 1024 (typ. 80 to 350)
2D-images/volume: max. 1024 (typ. 50 to 250)
VOL-Frames/sec.: max 16 (typ: 3-6)
The frame rate depends on scan parameters (VOL-Box size, quality and probe.
Display of sectional plane images:
synchronous with control setting, arbitrary movement in volume,
monitored position in volume.
Rotation: 360°, 0.5° increments (X-, Y- and Z-axis)
Magnification: adjustable from 0.25 to a factor of 4.00
3D-Rendering: Calculation and display of rendered gray scale images:
surface mode, maximum mode, minimum mode;
calculation time depending on rendering box size
Calculation and display of rendered color-images:
3D PD Mode: surface mode, max. intensity mode
Display Modes: 3-section Mode:
A triplet of 3 sectional planes normal to each other is displayed.
Full-sized image:
Display of 1 single full-screen image.
Niche image:
Display of the sectional plane triplets within the (graphics) cube.
4 section mode:
Display of sectional images + calculated 3D images
Display graphics: Color display of the center of rotation and the axes.
Data interface: SCSI Bi-directional transfer of volume, image data sets between console
(Option) and mass storage medium.
Data transferred: volume, image data
date, time
clinic's name / doctor's name
patient data
control settings
No measurements and text data!
Voluson
®
730 - Instruction Manual
7-8 105838 Rev. 3
To Next Page
Loading...
