Description of the System
Indicator (Screen arrow)
display a pointer arrow or hand
operation review: Indicator
(chapter 4.7.3)
2D Mode (all additional Modes will be switched off)
review: 2D Mode
(chapter 5)
Pressing this control activates the 2D mode.
Rotating allows setting of the 2D image gain within the probe-defined range.
review: 2D Gain
(chapter 5.4)
Color Doppler (on/off)
Pressing starts the CFM mode provided the active probe allows function.
Rotating allows setting of the Color-Doppler (CFM mode) gain within the probe-
defined range.
With active 3D function on, rotate the control for slicing within the volume.
review: CFM Mode
(chapter 8)
Pulsed Wave Doppler (on/off)
Pressing starts the PW Doppler mode provided the active probe allows function.
Rotating allows setting of the Pulsed Wave Doppler (PW mode) gain within the
probe-defined range.
With 3D-function on, rotation around the Z-Axis within the volume.
review: PW Mode
(chapter 7.1)
Power Doppler (on/off)
Pressing starts the PD mode provided the active probe allows function.
Rotating allows setting of the Power-Doppler (PD mode) gain within the probe-
defined range.
With 3D-function on, rotation around Y-Axis within the volume.
review: PD Mode
(chapter 9)
Motion Mode (on/off)
Pressing starts the M mode provided the active probe allows function.
Rotating allows setting of the Motion mode (M mode) gain within the probe-defined
range.
With 3D-function on, rotation around the X-Axis within the volume.
review: M Mode
(chapter 6)
Voluson
®
730 - Instruction Manual
3-16 105838 Rev. 3
To Next Page
Loading...
