4
In.seal provides an extra level of protection against
water infiltration. Connectors and power box are
designed to be watertight so that no water can
be in direct contact with electrical components
(IPX5).
in.seal
watertight protection
in.flo is an all-electronic dry-fire protection that is
built in to the remote heat.wav heater. The in.flo
eliminates the burden of adjustments, calibrations
and failures associated to usual water flow sensors.
in.flo
dry-fire protection
in.t.cip is an intelligent water temperature refresh
algorithm that calculates optimal time to start
pumps and get water temperature readings.
In.t.cip continuously readjusts the heater start
time (according to exterior temperature).
in.t.cip
water temperature algorithm
Features
The Y Series systems boast a long list of technical features. Each of them contributes to bringing the most advanced
solutions available to Y Series equipped spa owners:
The in.stik is a pen drive with an in.link connector
very similar to a USB memory stick. It connects
to the spa pack and contains data to program or
configure its system. The system executes the
data upload automatically.
in.stik
automated software upload
All Y Series packs support the in.touch WiFi
interface, allowing you to use your favorite iOS
device to communicate with your spa.
in.touch
you're always in touch with your relaxation
The Y Series is only compatible with the low-
voltage family of in.link connectors, such as
those used by keypads and similar low-voltage
accessories.
in.link
ingenious plugs and connectors
In.put was designed to ease wire insertion
(up to # 6 AWG) and connections. Tighter input
connection reduces heat generated for increased
component lifetime.
in.put
input terminal block
To Next Page
Loading...
Need help?
General
