Geeetech Rostock 301 Building Instruction

www.geeetech.com
Page 11
ShenZhen GETECH CO.,LTD
Step 3. Assemble the LCD frame (#A8) and LCD2004 (#49) with 4 M3 x 12
Screws (#20) and washers (#5).
Step 4. Install the knob over the protruding stalk and screw it in place with the
screw located in the hole.

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English