Geeetech Rostock 301 Building Instruction

www.geeetech.com
Page 72
ShenZhen GETECH CO.,LTD
Caution: You must take extreme care at this point. Ensure that you connect
the correct wires to the corresponding locations on the power supply.
Step 1. Connect the wires as shown below.
You should take note of the colors and their corresponding connection as a mistake
can cause you harm or damage the printer. If you are unsure of your skills and
abilities here, please consult a professional.

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English