Geemarc combi dect 295 - Volume Boost Function; End a Call

22
4.4 Volume Boost Function
The Volume Boost function allows you to amplify the handset earpiece volume to
compensate for the ear’s limited sensitivity.
Using a handset:
To turn on the Volume Boost function:
• Press VOLUME BOOST at any time during a call. “BOOST ON” displays
on the handset screen.
• When the Volume Boost function is activated, press / to increase or decrease
the earpiece volume.
To turn off the Volume Boost function and return the earpiece volume back to
normal:
• Press VOLUME BOOST again and the handset top indicator will turn off.
NOTE:
The audio boost feature will be turned off automatically when the call is ended.
Using the base:
During a call, you can activate the Volume Boost function with the volume of earpiece
increased by several dBs by pressing AMPLIFY , “BOOSTER ON” displays on the
base screen. To cancel it, press AMPLIFY again.
4.5 End a Call
Using a handset:
During a call, press to end the call.
OR
Put the cordless handset on the charging cradle to end the call.
Using the base:
During a call, put the corded handset on the base station to end the call.
OR
Press SPEAKER if you have a call in speakerphone mode.
USE YOUR PHONE