Geemarc combi dect 295 - Activate or Deactivate the Remote Access; Reset TAM to Default Settings

62
9.5.10.2 Activate or Deactivate the Remote access
Using a handset:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press and / to select TAM SETTINGS.
3. Press and / to select REMOTE ACC.
4. Press and / to select ON or OFF to turn on or off the remote access
respectively.
5. Press to confirm.
Using the base:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press MENU/OK and / to select TAM SETTINGS.
3. Press MENU/OK and / to select REMOTE ACC.
4. Press MENU/OK and / to select ON or OFF to turn on or off the remote
access respectively.
5. Press MENU/OK to confirm.
9.5.10.3 Reset TAM to Default Settings
Using the base:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press MENU/OK and / to select TAM SETTINGS.
3. Press MENU/OK and / to select TAM DEFAULT.
4. Press MENU/OK and then enter the correct system PIN (default PIN is 0000).
5. Press MENU/OK to restore the TAM settings to default.
ANSWERING MACHINE