Geemarc combi dect 295 - Set Alert Tones; Select Base; Set the Handset Language; Rename the Handset

42
8.3.4 Set Alert Tones
A single beep is emitted when you press a key. You can turn on or off the key tone.
You can also turn on the alert tones when low battery and out of range are detected.
Low battery tone will be emitted while you are talking with the phone to alert you that
you need to charge up your battery.
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
/
/
/
to select HS SETTINGS.
to select TONE SETUP.
to select KEY TONE / BATTERY TONE
/
OUT OF RANGE.
4. Press MENU/OK and
/
to select ON or OFF.
5. Press MENU/OK to confirm.
8.3.5 Select Base
If you have registered the handset to more than one base, you can select any one of
them to use with your handset.
1. Press MENU/OK and
/
to select HS SETTINGS.
2. Press MENU/OK and
/
to select SELECT BASE.
3. Press MENU/OK and
handset operates.
/
to select the desired base with which your
4. Press MENU/OK to confirm.
8.3.6 Set the Handset Language
You can choose the language to be displayed on the handset screen from a total of
7 languages English, Français, Dutch, Italiano, Deutsch, Espanol and Pyccknn.
1. Press LEFT SOFTKEY and / to select HS SETTINGS.
2. Press LEFT SOFTKEY and / to select LANGUAGE.
3. Press LEFT SOFTKEY and / to select your desired language.
4. Press LEFT SOFTKEY to confirm.
8.3.7 Rename the Handset
1. Press MENU/OK and / to select HS SETTINGS.
2. Press and / to select RENAME HS.
3. Press and enter the name of your handset.
4. Press to confirm.
PHONE SETTINGS