9.2 Play Messages on TAM
If you have new messages, the display will show e.g. 02/05 MSGS, which means you
have 2 new message out of total 5 messages. New messages are played first, and
then are saved as old messages, until they are deleted. Old messages are played
again after all new messages are played completely.
Using the handset:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press to show MSG PLAYBACK.
3. Press again to start message playback and the screen displays the date
of the message received.
4. During message playback, press / to adjust the message playback volume
respectively.
NOTE:
After new message is played, the new message will be saved as an old message
automatically unless it is deleted.
5. Press and / to select STOP, FORWARD, PREVIOUS or DELETE
to perform the following functions during message playback.
• STOP: Stop the current message playback and return to the ANS. MACHINE
menu.
• FORWARD: Skip to play the next message. The date information of the next
message will display if there is next message.
• PREVIOUS: Skip to repeat playing the current message from the beginning.
The date information of the current message will display.
• DELETE: Delete the current message and the next message will be played.
6. Press to confirm the setting.
NOTE:
Alternatively, you can use the following shortcut keys to control different operation
during message playback.
• Press 5 to stop message playback.
• Press 4 to skip to repeat playing the current message from the beginning. Press
4 twice to skip backward to the previous message.
• Press 6 to skip to play next message.
• Press 2 to delete the current message playback.
• Press / to adjust the playback volume.
• Press to turn the speakerphone on or off.
To Next Page
Loading...
