Geemarc combi dect 295 - Set the Recording Time of Incoming Message; Turn on or off the Base Screening

59
9.5.7 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming
messages.
Using a handset:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press and / to select TAM SETTINGS.
3. Press and / to select RECORD TIME.
4. Press and / to select your desired recording time (Available options:
60S, 120S, 180S, or UNLIMITED).
5. Press to confirm.
Using the base:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press MENU/OK and / to select TAM SETTINGS.
3. Press MENU/OK and / to select RECORD TIME.
4. Press MENU/OK and / to select your desired recording time.
5. Press MENU/OK to confirm.
9.5.8 Turn On or Off the Base Screening
You can select to turn on or off the call screening on base. When the
answering machine is set to ON and when there is an incoming message, the
base will start call screening automatically after the preset numbers of rings of
answer delay.
Using a handset:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press and / to select TAM SETTINGS.
3. Press and / to select BS SCREENING.
4. Press and / to select ON or OFF.
5. Press to confirm.
Using the base:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press MENU/OK and / to select TAM SETTINGS.
3. Press MENU/OK and / to select BS SCREENING.
4. Press MENU/OK and / to select ON or OFF.
5. Press MENU/OK to confirm.