9.5.10 Activate Remote Access
Your phone lets you check your messages, or otherwise operate your answering
machine, by calling the answering machine when you are away from home by
entering a 4-digit remote access PIN on a tone-dialing phone. Use the 4-digit
remote access PIN code to prevent other people from unauthorized access of your
answering machine.
9.5.10.1 Change the 4-Digit Remote Access PIN
Using a handset:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press and / to select TAM SETTINGS.
3. Press and / to select CHANGE PIN.
4. Press twice to enter the old PIN (default remote access PIN is 0000).
5. Press twice to enter the new 4-digit PIN.
6. Press twice to enter the new 4-digit PIN again.
NOTE:
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, user is requested to enter the valid system PIN again in Step 5.
7. Press to reconfirm.
Using the base:
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press MENU/OK and / to select TAM SETTINGS.
3. Press MENU/OK and / to select CHANGE PIN.
4. Press MENU/OK and enter the old PIN (default remote access PIN is 0000).
5. Press MENU/OK and enter your new 4-digit PIN.
6. Press MENU/OK and enter your new 4-digit PIN again.
7. Press MENU/OK to confirm.
To Next Page
Loading...
