Geemarc combi dect 295 - Direct Memory Keys; Set Direct Memory Keys in Handset

37
7 DIRECT MEMORY KEYS
You can store direct memory numbers (M1 to M4) in the handset. Then, you can
dial them directly from idle mode using the Photodect295.
7.1 Set Direct Memory Keys in Handset
1. Press LEFT SOFTKEY and / to select DIRECT MEM.
2. Press LEFT SOFTKEY and / to select the memory key to edit (M1 to
M4).
3. Press LEFT SOFTKEY and enter a new number or edit the number stored
already.
4. Press LEFT SOFTKEY to confirm.