Chapter 3 - Setup 39
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
g. Power-On Action describes the state the outlet will start at power-on (On, Off or
Last).
h. Power-On Delay is the time, in seconds, the unit waits after power-on before
performing the power-on action for the outlet.
3. Click the Save button if any settings are changed.
Device Operation:
1. Click the Operation icon.
Figure 3-5 Device Operation Page
2. Select the operation you wish to perform:
· On/Off turns on/off all outlets.
· For outlets currently on, Reboot cycles the outlets off, then back on after the reboot
hold delay. For outlets currently off, Reboot turns the outlets on.
· Cancel will cancel the current operation if it has not been completed yet.
· Reset Energy will reset the total Energy measured in kWh.
CAUTION
These actions affect the entire device.
To Next Page
Loading...