Chapter 3 - Setup 57
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
c. Enter Gateway IP address
d. Select Interface that route applies to
3. Click the Save button.
Figure 3-26 Modify an Existing Route
To modify an existing Route:
1. Click the Modify icon
2. Edit the desired fields
3. Click the Save button
Figure 3-27 Add a New DNS Server Address
To add a new DNS Server Address:
1. Click the Add icon.
2. Enter the IP of the desired DNS server. Up to two DNS servers can be added.
To Next Page
Loading...