GEM 3030 mFlow - Page 33

33 / 40
3030 mFlow
20.2 Order data separate measurement device
Order example
3030 000 ZH 41 4 E M42 00 C1 -
Type 3030
Nominal size (code) 000
Housing configuration (code) ZH
Housing material (code) 41
Seal material (code) 4
Sensor material (code ) E
Device version (code) M42
Option (code) 00
Supply voltage (code) C1
K-Number (code) -
Housing material Code
1.4435 stainless steel 41
Housing configuration Code
Separate measurement device for
GEMÜ in-line housing ZD
Separate measurement device for
GEMÜ wafer-type flange ZF
Separate measurement device for
GEMÜ weldolet ZH
Separate measurement device for
Neumo BioControl
®
in-line housing ZN
Separate measurement device for
Tuchenhagen Varivent
®
in-line housing ZU
Seal material Code
FPM (only housing configuration ZH, ZD, ZF) 4
EPDM 14
FFKM (Isolast J9505)
(only housing configuration ZH, ZD, ZF) F5
K-Number Code
Ra  0.8 m electropolished (internal/external)
surface finish data refer to medium wetted surfaces
(only housing configuration DU, DN) 1503
Supply voltage Code
24 V DC C1
Option Code
Without option 00
Profibus-DP DP
Sensor material Code
1.4435 / PEEK C
1.4435 / TFM 16 E
Device version Code
Measurement device, with field bus interfaces
(only for Option DP) M02
Measurement device 4 - 20 mA, 1 pulse output,
2 relay outputs (not for Option DP) M42
Measurement device temperature sensor,
1 pulse output, 2 relay outputs MT2
CONEXO Code
Without
Integrated RFID chip for electronic identification
and traceability C