GEM genesys xp User Manual

owner's manual
genesys xp
The recording studio section Page95
SELECTION DATA INPUT
VELOCITY
Modifies the key Velocity. This parameter represents the speed with which a note is played, or its intensity. Generally, the
greater the velocity the higher the volume. Velocity also affects the filter of many sounds, rendering them brighter with
increased velocity.
VELOCITY MODE
Provides two velocity modes to choose from which affect the way the
“Change Velocity” function operates.
Normal - The value indicated in «Velocity change» is added to or
subtracted from the key Velocity values.
Fixed - The key Velocities are all set to the value specified in the «Change
Velocity» parameter.
FROM LOCATOR... TO LOCATOR...
Determines the start and end point of the part to be affected. It is possible
to specify Measure, Beat and ‘tick’. Assignable values: within the actual
limits of the Song. It is not possible to specify a point beyond the end of
the Song.
TRANPOSE
This function transposes a recorded track by semitones. Also available are options to transpose the Chords and Music tracks of the Score of a song. This
allows you to see the score in the correctly transposed status after a transpose operation.
F6 TRACK
Transposition of a Song track by
semitones.
F7 CHORDS TRK
Transposition of the Chords track of
the Score by semitones.
F8 MUSIC TRK
Transposition of the Music track of
the Score by semitones.
TRANSPOSE VALUE Determines the value of the transposition (in semitones).
NOTE RANGE FROM... TO... the upper and lower limits of the notes to be To transpose a single percussive instrument of the Drum
track, assign the same note to the highest and lowest limit. For example, to change the snare (D2) set the
parameter to «Note range from D2 to D2». Values range: C-1- G9.
FROM LOCATOR... TO LOCATOR...
Determines the start and end point of the part to be affected. It is possible to specify Measure, Beat and
‘tick’. Assignable values: within the actual limits of the Song. It is not possible to specify a point beyond the
end of the Song. Values range: 0 -127.
MICROSCOPE
The Microscope allows you to modify every single event recorded in the tracks. The Event List at the centre of the display shows all the events recorded.
ACCESSING THE EVENT EDIT
MODE
1. Select the track which events you
wish to see in the Event List.
2. Use the UP/DOWN CURSOR
buttons to scroll through the events.
The selected notes are automatically
played.
3. Select the parameter to modify
using the UP/DOWN CURSOR
buttons.
4. Use the DIAL to modify the
selected parameter.
Recalls a dialog window where it is
possible to select the events that will
be displayed in the Event List.
F2 SHOW.
Inserts the event specified in the “INS.
TYPE” function at the current cursor
position. To position the inserted event
precisely, modify its locator accordingly
(the parameters to the left of the Status).
F3 INSERT
Cancels the selected event.
F6 DELETE
Selects the event currently playing
(when the Song is in playback mode),
or the event immedi-ately after the
current Song position.
F7 CATCH LOCATOR F8 GO TO LOCATOR
Takes the cursor directly to the
first event of the specified locator
(measure). The number can be
specified with the DIAL.

GEM genesys xp Specifications

General

Brand	GEM
Model	genesys xp
Category	Music Equipment
Language	English