To use the genesys xp as a stand alone unitPage44
owner's manual
genesys xp
To select the floppy disk utilities a valid support has to be
inserted in the drive
A FLOPPY DISK
G UTILITIES
Select the drive then press the function button G to visualize the utility menu. The utility menu will show different option
according to the selected drive.
1
2
Press A FLOPPY DISK
1
Press G UTILITIES
2
Press ENTER to confirm
3
As a security precaution the formatting option request a further pressure
of the ENTER key to confirm and start the operation.
Formatting
options
Change the
disk label
Refresh
the floppy
directory
B HARD DISK
1
2
Press B HARD DISK
1
Press G UTILITIES
2
Press ENTER to confirm
3
As a security precaution the formatting option request a further pressure
of the ENTER key to confirm and start the operation.
WARNING!
The Hard disk formatting cause the missing of all the
data. Please avoid this operation if is not necessary.
C CD ROM D RAM
1
2
To select the CD utilities a valid support has to be inserted in
the drive
The ERASE and FAST-ERASE function works using rewritable
CD only (CD-RW)
Press C CD ROM
1
Press G UTILITIES
2
Press ENTER to confirm
3
1
2
Press D RAM
1
Press G UTILITIES
2
Press ENTER to confirm
3
As you can see, the Ram utility regards the data input/output media support
like the floppy disk, the hard disk and the CD rom
To Next Page
Loading...
