Realtime use of the Genesys xpPage62
owner's manual
genesys xp
NAVIGATION ENTER MENU
NAVIGATION DATA INPUT
Sound Edit Quick
Press ESCAPE from the previous page, select the SOUND EDIT (QUICK) menu with the cursor, then press ENTER.
This menu provides an easy and fast way to customize the sound assigned to the selected part. Even for non expert users in
synth programming can modify the Genesys xp sounds. The display shows the screen containing eight main parameters of
the sound that can immediately be selected and modified.
Select a parameter, then input
the value with the DIAL
F6 COPY TO
Permits to copy the edit
executed in a part on
another part
F7 RESTORE
Resets the parameters value
in the selected part
F8 RESTORE ALL
Resets the parameters value
to all parts
To store the preset edit: user preset area
Once your preset edit is completed you have to memorize it in the user preset area.
Once the new preset is ready press the STORE button
1
Select the field PRESET with the RIGHT CURSOR
2
Type a name for the new preset and select a memory
location, then press ENTER
3
Press the PRESET button, then the NEXT PAGE button
4
To Next Page
Loading...
