122 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
SCREEN D27
GPS menu
A-initialize-GPS B-navigation
C-synch-to-UTC D-test
E-post-processing no
F
At the beginning of each survey (or when re-starting a survey from the main menu), a warning is
momentarily displayed if post-processing is disabled. If you DO want to store DGPS data, press
1C
and enable post-processing from the
GPS menu. Otherwise, continue with the current settings when
the warning message disappears.
SCREEN D28
! GPS WARNING !
storing for post-processing
disabled
After the survey the DGPS binary data can be transferred to a PC using A-send-raw-data
SCREEN D29
GPS yes
8544455 bytes
A-send-raw-data F-ok C-change
To Next Page
Loading...
