36 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
Line 0 to 99999
Station 0 to 9999999 or 0.00 to 99999.99
x y -9999999 to +9999999 or -9999999.99 to +9999999.99
The same limits apply for the increments, but selections must be done in such a way that after the
increments are added the numbers are still within range.
5.3.5 Setting the Time
In the Survey Menu, press F to highlight time
SCREEN 16 survey mode position
time file
cycle time tuning AC filter
display mode text ID
13 V 96MO15:05:04.0
this time has been set by keyboard
time running
A-start C-change
←
BF
→
The line that has “this time has been set by keyboard” can also have other values as follows:
• has been set by GPS.
• has been set by default.
• has been set by cable synch.
• has been set by remote.
To change the time, press C-change and the following screen is displayed:
SCREEN 17
wyymmddhhmmss
c-clear
To Next Page
Loading...
