46 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
5.3.11 Entering Text
In the Survey Menu, press F to highlight Text.
SCREEN 31 survey mode position time file
cycle time tuning AC filter
display mode text ID
A-start C change
←
BF
→
C-change allows an entry of a text with comments or observations pertinent to the survey. More
text or comments can be added later as the survey progresses (see section 5.4.1).
Each file may have its own text (including base mode).
You can recover the text later using SEND (dumping data) in a separate file or you can access it
chronologically with the data.
5.3.12 Changing the Magnetometer ID Number
In the Survey Menu, press F to highlight ID.
SCREEN 32 survey mode position time file
cycle time tuning AC filter
display mode text ID
123456789
A-start C- change
←
BF
→
C-change allows a change of ID number of this unit –value is shown in the headers of the files
when using SEND. A maximum of 9 digits is allowed.
This setting has no effect on the readings or the survey mode itself. It could be used to identify the
operator or any other additional information pertinent to the current file or unit.
To Next Page
Loading...
