28 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
5.3.1 Setting the Survey Mode
In the Survey Menu, highlight survey mode and press C-change. The survey modes that are
applicable for the unit are displayed.
NOTE:
The available survey modes of your unit may differ from the ones shown here
depending on its model, its software, and its hardware.
SCREEN 4
A – mobile B – base
C – grad
D – walkmag E – walkgrad
and select:
A mobile
B base (station)
C grad
D walkmag
E walkgrad
After a survey mode has been selected, the settings that apply to that mode is displayed. For
example, if the mobile survey mode is selected, you see:
SCREEN 5
survey mode position time file
cycle time tuning AC filter
display mode text ID
connect sensor now
029123 readings left
mobile
A-start C-change ←
BF
→
To Next Page
Loading...
