124 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
In different modes of operation GPS OEMV module communicates with magnetometer on two
different baud rates 115200 and 9600. After GPS powered-up magnetometer attempts to establish
communication with GPS on both baud rates and screen will show toggling of baud rates on the
screen. Once communication link works, GPS will be switched to 115200 baud rate and it will be
ready to be initialized. After GPS was powered-up it normally takes 10-12seconds before GPS will
respond.
To Next Page
Loading...
