142 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
NOTES:
The start and stop times used in the last survey is displayed.
If in the last survey the unit was used in the programmable mode, the start and
stop times displayed is those of the first program in memory.
Press
C-change to enter different start and stop times
SCREEN G7
base will run every day
from
to
Enter the time as hh:mm in 24 hrs format. If an invalid number for hours or minutes is entered the
unit displays
SCREEN G8
.base will run every day
from 66:00 to 19:00
illegal entry F
Pressing
F returns both times to 00:00. To enter the correct time, start the process again.
When the last digit has been entered the unit returns to screen G6 and displaying the new program.
Press
A-start to start the base.
To Next Page
Loading...
Need help?
General
