144 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
SCREEN G11 ----start---- ----stop----
p# yymmdd hh:mm yymmdd hh:mm
01 020503 07:00 020504 23:00
02 000000 00:00 000000 00:00
03 000000 00:00 000000 00:00
04 000000 00:00 000000 00:00
05 000000 00:00 000000 00:00
A-start C-change E-new-mode
NOTES:
The schedules used in the previous programmed surveys is displayed.
If the last survey the unit was used in daily base mode, the hours and minutes of
the first program is those of the daily program, but the dates is the last ones
stored in memory.
Press C-change to enter different schedules.
SCREEN G12 ----start---- ----stop----
p# yymmdd hh:mm yymmdd hh:mm
01
020503 07:00 020504 23:00
02 000000 00:00 000000 00:00
03 000000 00:00 000000 00:00
04 000000 00:00 000000 00:00
05 000000 00:00 000000 00:00
C-change A-move D-delete <BF> E
A solid black square indicates the first program.
B scrolls through the programs backward
F scrolls forward
D-delete deletes the program marked with the black square and moves the programs below it up
one step in the list.
A-move places a copy of the marked program at the current program number and moves the
marked program on step down. NOTE that this overwrites program number 30.
To Next Page
Loading...
