Gemalto Prox–DU Installation Guide

Computer Installation Guide
Prox–DU & Prox–SU
www.gemalto.com
DOC119735A Public Use Page 18/59
Contact interface
The contact interface is available with the Prox–DU and the Prox–SU and is composed of a
smart card connector with a smart card slot located in the front cabinet for the Prox–DU and
located inside the casing for the Prox–SU.
Figure 15 – Contact card slot (Prox–DU and Prox–SU)
This contact interface complies with the ISO7816 standard.
LED interface
Two LEDs are available as visual indicators:
Figure 16 – Visual indicators
The indicators give information about the smart card interface as described in the next table:
Card Indicator Description
Off The card interface is deactivated
Slow Blink (0,2 s / 2 s) The card interface is ready
Blink (0,5 s / 1 s ) The card is present and inactive (powered off)
On The card is present and active (powered on)
Flashing The card communication is in progress
Table 5 – Prox–DU and Prox–SU indicator’s status
Note: When no SIM/SAM card is inserted into the Prox–SU, the yellow indicator will always
be off.
Contact card
yellow indicator
Contactless card
blue indicator

Gemalto Prox–DU Specifications

General

Brand	Gemalto
Model	Prox–DU
Category	Card Reader
Language	English