EasyManuals Logo

Gemalto Prox–DU Installation Guide

Gemalto Prox–DU
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Computer Installation Guide
Prox–DU & Prox–SU
www.gemalto.com
DOC119735A Public Use Page 27/59
Close the “Synaptic Packet Manager” windows
You need now to install the CCID driver:
Use the File Manager and copy the libccid_1.4.0-1_i386.deb and pcscd_1.5.3-
1ubuntu4.1_i386.deb into your home directory (e.g. /home/yourname/Desktop)
Click on “Application” “Accessories” “Terminal”, then type the following commands in
the terminal window and type the “Enter” key at the end of each line:
cd /home/yourname/Desktop
sudo dpkg –i libccid_1.4.0-1_i386.deb
sudo dpkg –i pcscd_1.5.3-1ubuntu4.1_i386.deb
If a password is required, please enter it.
You can close the terminal window.
You can plug the USB cable of the Prox-DU or Prox-SU into a USB port of your Linux
computer.
The device will then be ready for use.
Installation procedure for Ubuntu 9.04 64bits
The Ubuntu 9.04 distribution is not a long term support one, so several packages should be
manually installed:
Use the File Manager and copy the following installation packages under your home
directory (e.g. /home/yourname/Desktop):
libusb-1.0-0_1.0.8-2_amd64.deb
libpcsclite1_1.5.3-1ubuntu1_amd64 .deb
libccid_1.4.0-1_amd64 .deb
pcscd_1.5.3-1ubuntu4.1_amd64 .deb
Click on “Application” “Accessories” “Terminal”, then type the following commands in
the terminal window and type the “Enter” key at the end of each line:
cd /home/yourname/Desktop
sudo dpkg –i libusb-1.0-0_1.0.8-2_amd64.deb
sudo dpkg –i libpcsclite1_1.5.3-1ubuntu1_amd64.deb
sudo dpkg –i libccid_1.4.0-1_amd64.deb
sudo dpkg –i pcscd_1.5.3-1ubuntu4.1_amd64.deb
If a password is required after each line, please enter it.
You can close the terminal window.
The packages are now installed on your computer.
You can plug the USB cable of the Prox-DU or Prox-SU into a USB port of your Linux
computer.
The device will then be ready for use.
Installation procedure for Ubuntu 10.04 64bits
First check if the “libusb-1.0-0” and “libpcsclite1” packages are already installed in the
system as decribed for Ubuntu 10.4 32bits distribution.
You need now to install the CCID driver:

Table of Contents

Other manuals for Gemalto Prox–DU

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gemalto Prox–DU and is the answer not in the manual?

Gemalto Prox–DU Specifications

General IconGeneral
BrandGemalto
ModelProx–DU
CategoryCard Reader
LanguageEnglish

Related product manuals