Computer Installation Guide
Prox–DU & Prox–SU
www.gemalto.com
DOC119735A Public Use Page 29/59
Linux Debian distribution installation
Please note that all components of the installation package described below are supported
by the Linux community and will be included in the next revisions of the Debian distribution.
The components considered in the next paragraph are generic components and are not
specific to the Gemalto Prox-DU and Prox-SU devices.
Installation pre requisites
The Linux Debian distribution should be installed on the computer.
Update first your Linux Debian operating system:
• Click on “System” ► “System administration” ► “Update Manager”
• Enter your password
• Click on “Verify”
• Then click on “Update”
Then download the required Debian package (a common package for the Prox-DU and the
Prox-SU) available in the Gemalto support website: http://support.gemalto.com
.
Note that before running the “dpkg” commands listed hereafter it is preferable to remove the
older versions of the required packages if they are already installed to avoid error
messages.
Installation procedure for Debian 5.0.x 32 bits
Several packages should be manually installed:
Use the File Manager and copy the following installation packages under your home
directory (e.g. /home/yourname/Desktop):
• libusb-1.0-0_1.0.6-1~bpo50+1_i386.deb
• libpcsclite1_1.5.5-3_i386.deb
• libccid_1.4.0-1_i386.deb
• pcscd_1.5.5-3_i386.deb
Click on “Application” ► “Accessories” ► “Terminal”, then type the following commands in
the terminal window and type the “Enter” key at the end of each line:
cd /home/yourname/Desktop
sudo dpkg –i libusb-1.0-0_1.0.6-1~bpo50+1_i386.deb
sudo dpkg –i libpcsclite1_1.5.5-3_i386.deb
sudo dpkg –i libccid_1.4.0-1_i386.deb
sudo dpkg –i pcscd_1.5.5-3_i386.deb
If a password is required after each line, please enter it.
You can close the terminal window.
The packages are now installed on your computer.
You can plug the USB cable of the Prox-DU or Prox-SU into a USB port of your Linux
computer.
The device will then be ready for use.
To Next Page
Loading...
Need help?
General
