第 7 页 共 16 页
Parameter
High byte
Parameter
Low byte
Default Rang Comment
Pedal Curve mode setup:
0：Auto Calculated liner Curve（According to the
highest speed automatic computation）
1：Two segment liner Curve. (You shall be free to
set slow start after fast or fast start after slow, the
parameters "31" and "32" cooperate with use ）
2：Arithmetic Curve（ the parameters [33]
cooperate with use）
Pedal
3
0
0
0 /1 / 2 / 3
3：S curve（the operate control is very well, slow
start after fast ）
Speed
Speed
Speed
Pedal forward angle
Pedal forward angle
Pedal forward angle
Speed
Pedal forward angle
To Next Page
Loading...
