Gemsy 500 - Page 95

第 8 页 共 16 页
Parameter
High byte
Parameter
Low byte
Default Rang Comment
1 3000 200 ~4000
Two segment controls the speed slope：mid
turning point speed RPM(two segment of turning
point speed]，the parameter[30] set to 1 effective。
2
800 0 ~1024
Two segment controls the speed slope：
mid turning point of pedal Simulated value，the
parameter[30] set to 1 effective, the value is
between[38]and[39].
Arithmetic Curve supplementary parameter：
the parameter[30] set to 2 effective,
1：Square（the low speed control is very well,
slow start after fast）；
3 1 1 ~2
2：Square root（Responding speed is fast, fast
start after slow）；
Speed
Speed
mid turning point
of pedal Simulated
Speed
Pedal forward angle
Mid turning
p
oint speed
Speed
Pedal forward angle
Pedal forward angle
Pedal forward angle