GENASYS LRAD - 10.0 Specifications; UTX-B40 Transmitter Technical Specifications; URX-P40 Receiver Technical Specifications

LRAD WIRELESS KIT
GENASYS INC.
Manual Part No.: 119514-00 Rev. 03
22
10.0 Specifications
Transmitter: UTX-B40
Dimensions (excluding antenna)
4.7” H x 5.0” W x 1.5” D (11.9 cm x 12.7 cm x 3.8 cm)
Weight (excluding batteries)
11.3 oz (320.3 g)
Oscillator Type
Crystal-controlled PLL synthesizer
Antenna Type
1/4 λ wavelength wire antenna
Reference Frequency Deviation
+/- 5 kHz (-60 dBV, 1 kHz input)
Capsule Type
Electret condenser
Directivity
Omni-directional
Distortion
0.9% or less (-60 dBV, 1 kHz input)
Audio Attenuator Adjustment Range
0 dB to 27 dB (3 dB steps)
Signal-to-noise ratio
60 dB (-60 dBV, 1 kHz input)
102 dB (GAIN MODE set to AUTO GAIN, max.)
96 dB (GAIN MODE set to NORMAL, max.)
Audio Delay
0.35 ms
Supply Voltage
3.0 VDC (two LR6/AA size alkaline batteries)
5.0 VDC (supplied from USB connector)
USB Port
Type C
Low/High Temperature: Operating
0° C to 50° C (32° F to 122° F)
Low/High Temperature: Storage
-20° C to 55° C (-4° F to 131° F)
Receiver: URX-P40
Dimensions (excluding antenna)
5.5” H x 4.3” W x 1.9” D (14.0 cm x 10.9 cm x 4.8 cm)
Weight
19.2 oz (544.3 g)
Oscillator Type
Crystal-controlled PLL synthesizer
Antenna Type
1/4 λ wavelength wire antenna (angle-adjustable)
Reception Type
True diversity method
Distortion (T.H.D)
0.9% or less (1 kHz sine wave, 5 kHz modulation)
Analog Audio Output Adjustment
Range
-12 dB to +12 dB (3 dB steps)
Signal-to-Noise Ratio
60 dB (1 kHz sine wave, 5 kHz modulation)
Audio Output Level
-60 dBV (3.5 mm diameter 3-pole locking mini jack,
analog output, 0 dB audio output level)
-20 dBFS (external connection, digital output, 0 dB
audio output level)
-50 dBFS (external connection, analog output, 0 dB
audio output level)
Audio Delay
0.35 ms (analog)
0.24 ms (digital)
Low/High Temperature: Operating
0° C to 50° C (32° F to 122° F)
Low/High Temperature: Storage
-20° C to 60° C (-4° F to 140° F)