Generic Trigger X 50ccm User Manual

- 108 -
13.5.2 Inspection
Inspect the wear and tear of the gear surface and driving pawl respectively.
Severe wear and replace them.
13.5.3 Main shaft and sub shaft assembly
Note：
In the assembly, evenly spread lubricating oil on each gear and shaft to ensure no clamping
stagnation after assembly.
Note：Assembly of the clutch is conducted in the reverse order of disassembly.
gear
surface
driving
pawl
main shaft set
sub shaft set

Generic Trigger X 50ccm Specifications

General

Brand	Generic
Model	Trigger X 50ccm
Category	Motorcycle
Language	English