Generic Trigger X 50ccm User Manual

- 21 -
replaced with new product.
Warning!
Smoking or lighting fires are strictly forbidened.
Inspection/adjustmentof accelerator's pull wire
Check the smoothness of accelerator pull wire.
Check the clearance of accelerator pull wire.
Clearance：2 - 6mm
The main adjusting position is on the carburator side.
Loosen the fixing nut and adjust by turning adjusting nut.
Air cleaner
Replacement of filtrator.
Dismantle the cushion and frame cover.
Dismantle the fastening screw of air cleaner cover and take
down strainer cover.
Dismantle bolt and take down filtrator.
Dismantle the sponge from the filtrator.
Check whether the filtrator is polluted or damaged.
If it is polluted or damaged, please replace with new one.
Changing time
If the motorcycle is frequently driven on bad road or in rain, it
should be replaced early.
*Attention
•Please confirm whether the air cleaner is installed as installing
air cleaner cover.
Intake pipe
Intake pipe
Vent. Pipe
Vent. Pipe

Generic Trigger X 50ccm Specifications

General

Brand	Generic
Model	Trigger X 50ccm
Category	Motorcycle
Language	English