Generic Trigger X 50ccm User Manual

- 28 -
Specified pressure unit：Kpa
Specification Tire pressure
Front
wheel
3.00-21 225
QJ50-23
Rear
wheel
4.10-18 225
Front
wheel
100/80-17 225
QJ50-23A
Rear
wheel
130/80-17 225
Tyre specification
Front wheel
of inside
3.00-21
Front wheel
of outside
3.00-21
Rear wheel
of inside
4.10-18
QJ50-23
Rear wheel
of outside
4.10-18
Front wheel 100/80-17
QJ50-23A
Rear wheel 130/80-17
Check whether the front wheel spindle is loosened.
Check whether the nuts of rear wheel are loosened.
If so, please tighten to specified torque force value.
Torque force value： Front wheel spindle 55-62 N·m
Rear-wheel spindle nut 85-98 N·m
Steering post bearing and handle
fixture
Swing the handle to check and confirm whether the leads
are interfered.
Turn the front wheel and swing the handle freely to
confirm.
Check the steering post bearing if the handle is not smooth
and loosened.
left and
righ
actuation
inspection

Generic Trigger X 50ccm Specifications

General

Brand	Generic
Model	Trigger X 50ccm
Category	Motorcycle
Language	English