Genesis GV80 - Page 489

Driver assistance system
7-154
6\VWHPRSHUDWLRQ
Smart Parking, Remote Smart
Parking
1. Getting ready for parking
OJX1070107ROJX1070107R
(1) With the engine turned on,
depress the brake pedal and shift
the gear to D (Drive) or N (Neutral).
(2) Press and hold the Parking/View
(
) button to turn on Remote
Smart Parking Assist.
• The infotainment system has to
operate properly to use Parking
function.
• If you drive above 3 mph with the
engine on, you may use the Parking
function with the gear shifted to N
(Neutral).
2. Searching for parking space
OJX1079184LOJX1079184L
(1) Slowly drive forward maintaining
the distance of approximately
100 cm (40 in.) from the parked
vehicles.
(2) When searching for a parking
space is complete, a message will
appear on the infotainment system
screen with an audible sound to
notify the search is complete.
(3) ‘Select Parking Type’ will be
displayed on the infotainment
system screen and the selected
parking space will appear on Top
View screen of Surround View
Monitor.
• The system searches for parking
spaces that are next to parked
vehicles, or parking spaces with
parked vehicles in front or rear.
• Whilst searching for a parking
space, when vehicle speed is above
12 mph, a message will appear on
the infotainment system screen
informing you to slow down. When
vehicle speed is above 18 mph,
Parking function will turn off.
• Searching for a parking space will
be completed when there is enough
space to move the vehicle in
addition to the parking space.
• Even if an audible sound is heard
to notify that searching for a
parking space is complete, search
completion can be cancelled
immediately depending on
surroundings.
• If the you press and hold the
Parking/View (
) button to turn
on Remote Smart Parking Assist, the
previous searched parking space
can be displayed.