Genesis GV80 - Page 497

Driver assistance system
7-162
4. Smart Exit
OJX1079195LOJX1079195L
(1) Press the Parking/View
(
) button when the vehicle is
stopped by depressing the brake
pedal. When the brake pedal is
released, Remote Smart Parking
Assist will automatically control
the steering wheel, vehicle speed
and gearshift.
(2) Whilst Smart Exit function is
operating, if you do not hold down
the button, the vehicle will stop
and system control will pause. The
function will start operating again
when the button is pressed and
held again.
(3) When the vehicle reaches the
target exit location, a message will
appear on the infotainment system
screen to inform you that exit is
complete.
• Smart Exit function will not operate
if the door is open or the seat belt is
not fastened.
• Vehicle speed can be adjusted
by depressing the brake pedal
whilst Smart Exit function is
operating. However, the vehicle
does not accelerate even when the
accelerator pedal is depressed.
• If exit is completed whilst
depressing the brake pedal, Exit
function will complete with the gear
in D (Drive).
• If exit is completed whilst
depressing the accelerator pedal,
you must take your foot off the
accelerator pedal once for the
accelerator pedal to operate.
• If there is no vehicle operation such
as depressing the brake pedal or
accelerator pedal within 4 seconds
after exit is complete, the vehicle
will automatically shift to P (Park)
and engage EPB (Electronic Parking
Brake).
• After Exit function is complete,
always check the surroundings
before driving.
&$87,21
If it is determined that the space is
WRRVPDOOZKHQWKHYHKLFOHLVEHLQJ
FRQWUROOHGWRH[LW([LWIXQFWLRQZLOOEH
FDQFHOOHG