GSM settings
154. GSM operator
Selects GSM operator from the list. “Automatic”
mode tries to auto-detect GSM operator by the
information from GSM network, and apply rele-
vant Pre-paid/GPRS settings. Selection of
“Other” requires Pre-paid USSD commands and
GPRS settings to be entered manually. Selecting
any operator from the list applies relevant set-
tings to the Pre-paid and GPRS configuration.
List of available GSM operators depends on a
firmware version.
151. PIN code for SIM
Entering PIN code for SIM card. If the SIM card
does not use PIN code, it will be ignored.
NOTICE – if incorrect PIN code will be pro-
grammed, the SIM card must be initialized out-
side of the control panel (e.g. in the GSM
phone). It is not necessary to use PUK code.
152. SMSC number
SMS center number. If left empty, PRiMA uses
SMSC number defined on the SIM card (recom-
mended).
153. GSM Watchdog
Automatic GSM module restart with pro-
grammed interval. The value entered is applied
in hours. Setting to 0 disables the “Watchdog”
feature.
Default: 0
To Next Page
Loading...