Genius REMOTE 600 - Advanced Troubleshooting and Macros; Macro and Button Functionality

ENGLISH
28
Problem Solution
The Remote 600 cannot
operate a device after
learning a function.
*Check the Remote 600 has
learned the function correctly.
(See P15)
*Delete the code and teach
the Remote 600 again. (See
P
17, P15)
*Check you used the correct
remote to teach the Remote
600.
*The Remote 600 cannot learn
all codes. Some remote’s
frequency might be out of the
learning range. You may not
be able to program the
Remote 600 for some devices
or functions.
The Remote 600 emits
three beeps when
learning a function.
*Check the remote is correctly
aimed at the Remote 600’s
learning eye and you are
holding the remote’s button
until the function is learned.
*Check the remote’s IR
transmitter is 5 ~ 10 cm from
the Remote 600’s learning
eye.