ENGLISH
30
Problem Solution
*Sometimes the code’s
frequency is out of the learning
range. The Remote 600 cannot
learn all codes. You may not
be able to program the
Remote 600 for some devices
or functions.
Macro does not work. *Check the correct device is
selected on the Remote 600.
Check you are using the
Remote 600 within the effective
transmission distance (8 ~ 10 m)
*The batteries may be
discharged. Replace the
batteries as described in
Installing batteries on page 4.
*Check that the macro is
programmed correctly. Re-
program the macro as
described in
Creating Macros
on page
19.
A button on your
existing remote
performs two or more
functions.
*Some remotes issue multiple
codes when a single button is
pressed. Teach separate
buttons on the Remote 600 for
these different codes.
To Next Page
Loading...
