Removing
and
Installing
Your
Rear
Window
The rear window of your vehicle
is
removable. This
allows you to open the back opening all the
way
or
to
replace the window
if
it becomes deteriorated.
To
remove the rear
window:
1.
Open the rear gate all the way.
2.
Unfasten the canvas flaps at the lower corners of the
rear
window
to uncover the zipper pull.
3.
Unzip the rear window.
4.
Hang the rear window down
so
it hangs outside
of
the
vehicle.
5.
Push
the clip
on
the driver’s side
of
the rear window
frame (see illustration above) and pull
the
bar
rearward.
Then slide the bar to the left
to
release
the
passenger’s side.
Reverse the steps
to
install the rear
window.
Make
sure
that the window is completely closed before driving.
2-46
To Next Page
Loading...
Need help?
General
